The Three Greatest Moments In Ghost 2 Immobiliser Installation History > 자유게시판

본문 바로가기

자유게시판

The Three Greatest Moments In Ghost 2 Immobiliser Installation History

본문

Autowatch Ghost II Immobiliser Installation

311159893_995841588058766_6213964028136182559_nlow.jpgGhost immobilisers are among the most advanced features in vehicle security. They are revolutionary as they shield your vehicle from key-cloning as well as hacking.

The system uses a unique disarm sequence, requiring the correct PIN code to start your vehicle. This is accomplished by pressing the buttons on the dashboard or steering wheel.

TASSA Approved

The new TASSA-verified Ghost-II CAN from autowatch ghost installers west midlands is a groundbreaking device designed to fight the most recent car crime trends, including key cloning, hacking and other forms of theft. This innovative system connects directly to your vehicle's onboard CAN data network, stopping your vehicle from being driven or started without the proper code. The system is undetectable and does not utilize radio frequencies or key fobs. Instead, it allows you to create a unique sequence of PINs with buttons on your dashboard or the steering wheel, which you are able to modify at any time. You can create a PIN as long as 20 presses long to ensure maximum security. an emergency code that is secure is included too.

The system communicates with the vehicle's CAN data network to identify the moment a particular PIN has been entered, this is then sent to the vehicle that disables the engine and ignition and shuts down critical components such as the starter motor and fuel pump. The system features a "valet' mode that allows you to deactivate it and prevent valets or staff from driving your car without the correct key.

Contrary to conventional immobiliser relays that can be deactivated using readily available professional diagnostic tools The Ghost device uses the onboard data network to communicate with the ECU and cannot be altered with. It is a sealed unit and therefore, it is impossible to listen in to the circuits. This makes it impossible for thieves to hear the distinctive clicking sound that traditional immobilisers relays emit.

This technology is also not vulnerable to jamming devices utilized by high-tech thieves, and because it works on the CAN data network, it's unaffected by other diagnostic tools. This means it's a perfect anti-theft tool for any modern vehicle.

After you've booked your TASSA approved bmw m4 ghost installer 2 immobiliser, we will arrange an appointment and time to visit your business or home to complete the installation. We will run through the entire demonstration with you, and then give you the owner's manual, emergency cards, two autowatch ghost installation walsall window sticker and a installation certificate.

Insurance Approved

The local ghost installer is a security tool that is installed aftermarket and protects you from the kinds of thieves interested in stealing vehicles. It works by preventing your engine from starting unless the appropriate sequence of buttons is pressed. This sequence is only recognized by you, therefore in the event that your vehicle is broken into, thieves will not be able to start it and will likely leave the vehicle in peace for fear of being caught. The ghost also comes with a 'silent mode', which disables the vehicle if not in use and can be turned off with the press of a button.

The system is TASSA-approved, which means that some insurance companies will recognize it as an extra security measure for your car. It can be used together with other approved by Thatcham security measures, such as trackers, to help prevent your vehicle from being stolen. This gives you peace of mind.

The system also communicates with the ECU of your vehicle through the CAN data loop which is totally inaudible for diagnostic tools. The Ghost is not able to be bypassed by a burglar simply by adding a new key to the vehicle or replacing the ECU. The system will only start your vehicle if you enter the correct pin code. This unique PIN is only yours to know and is able to be changed at any time.

The Ghost is a highly discrete immobiliser that can be fitted to almost all vehicles without the need for wiring or the addition of aftermarket key fobs. It is directly connected to the vehicles data network CAN and a personalised PIN code of your preference is programmed into it by using buttons already present on the dashboard and steering wheel. This code will stop the vehicle from being started unless the correct sequence has been selected first. If the code is misinterpreted it is possible to use secure emergency codes which can be reset with your mobile phone. There is an app that can be used on iOS and Android to reduce the requirement to enter pins every time, providing more security.

Distinction

In contrast to an GPS tracker which only assists in locating your car after it's been stolen, an immobiliser system prevents the vehicle from being stolen in the first place. It does this by stopping the engine from starting unless it is able to receive the correct code from the key fob, or a smartphone app downloaded to it. This is the most effective way to prevent wheel jacking and other kinds of theft since the thief has no choice but to leave the car unattended or risk being caught.

The bmw x6 ghost installer immobiliser is a weatherproof, tiny device that is fitted into the wiring harness inside your vehicle. It has a connection to the CAN data network and is hidden away so that thieves cannot find it or disable it by simple wire cutting. The system is equipped with a service-mode that can be activated to permit your garage to work on your vehicle without needing to know the password.

Once you've got the device fitted to your vehicle, you'll be able to arm and disarm it from your smartphone using its dedicated application. You can alter the PIN code at any time you wish to ensure that you're the only person who has access to your vehicle. This is helpful if you intend to sell your car in the future since it will increase the price of resales.

The Ghost immobiliser comes with a unique characteristic: it's discrete and doesn't leave any marks on the interior body of your vehicle which makes it a great addition to any car. It's easy to install, works quietly and won't disrupt any other systems in your car.

Many people are placing more importance on the appearance of their cars and a subtle immobiliser can add to the look and feel of your car. This is particularly attractive for those who frequently utilize their vehicles to transport valuable items, as it will help to deter any potential thieves from pursuing them. Ghost immobilisers work together with other anti-theft technologies such as trackers to provide unrivalled security for your car.

Low Maintenance

Ghost immobilisers function by connecting directly to the CAN data network. They are almost unnoticeable, since they do not utilize LED indicators or other key fobs. It doesn't emit radio signals, and is quiet so thieves cannot hear it working. The device can be concealed in many different locations, (even underneath the floor mats) and is a great option for those looking to protect their car without sacrificing aesthetics.

This device stops you from starting your car unless you enter an individual password. This is done by pressing a combination of buttons located on your dashboard as well as the steering wheels in a certain sequence. This will prevent hackers from cloning or hacking into your system and stop them from starting the vehicle.

Thieves can also attempt to increase your signal to gain access to your vehicle, however the Ghost will be able to detect this and will prevent your vehicle from starting until enter the correct disarming sequence. In contrast to other security systems which can be activated by entering a incorrect code or entering the wrong code, the Ghost will continue to block your car from starting until you type the correct passcode.

The Ghost remains in service mode until you put it back into "service" which is activated by pressing the same combination of buttons as you did to arm it, (this can be done when you go to your dealer for maintenance or warranty work). This is to stop it from being taken away by unauthorised people and to ensure that it is rearmed when required.

If you decide to switch vehicles in your ownership it is possible to transfer the Ghost to the new vehicle, provided that the new vehicle is compatible. The most recent version of Ghost also comes with QR finger print stickers that are linked to the International Security Register, meaning that in the event that your Ghost is stolen for parts, it will be traced back to you and your vehicle. This can deter criminals from stealing cars fitted with Ghost because they be aware that the vehicle is secured and they would be risking getting caught and arrested.

댓글목록0

등록된 댓글이 없습니다.

댓글쓰기

적용하기
자동등록방지 숫자를 순서대로 입력하세요.
게시판 전체검색